Stainless steel wire mesh demister
.jpg)
Stainless steel wire mesh defoamer 304 wire mesh defogger 316L wire mesh defogger mist separation wire mesh defogger 321 wire mesh defogger stainless steel wire mesh mist inhibitor
Product material: Q235B 201 304 304L 321 316 316L 2205, etc
Product specifications: Conventional diameter: DN300-6400mm, all sizes can be customized
Thickness: 100-600mm (special thickness can be customized)
Screen type: Standard, high-efficiency, high penetration type
Installation type: top mounted and bottom mounted
Product features: 1. HG/T21618 mesh demister, HG/T21586 mesh demister, HG5 standard series mesh demister, wave series mesh demister, and other types of mesh demister and mesh demister products.
Product Usage:
Wire mesh demister (defogger) is used to separate liquid droplets carried by gas in the tower, ensuring mass transfer efficiency, reducing valuable material loss, and improving the operation of the compressor after the tower. Generally, wire mesh demister is installed at the top of the tower. It can effectively remove 3-5 μ m mist droplets. If a defoamer is installed between the trays, it can not only ensure the mass transfer efficiency of the trays, but also reduce the spacing between the trays. So the wire mesh defoamer is mainly used for gas-liquid separation. It can also be used as an air filter for gas separation. In addition, the defoamer mesh can also serve as a buffer for various instruments in the instrument industry, such as an electronic shield to prevent electromagnetic interference. |